Wired & Wireless Integrated Unit - Gooseneck Pole (2.8'' Screen)

HS Code 8543709990 Material Metal + Plastic

Introduction

Wired and wireless dual-mode units, real-time switching, and excellent link backup.
Based on the iMeetingPlat™ TECH PLATFORM, with AFH TECH (Adaptive Freq. Hopping) in the 500Mhz~600Mhz band.
AFH TECH provides self-correction capability, eliminating the frequency management; solving wireless interference problems automatically.
Built-in AI Processing Module (optional), Efficient Howling Suppression + Intelligent Noise Reduction; Sound Pickup Distance > 80cm.

XDC236_Conference_System_Components_-family

It has wired and wireless dual-mode units, real-time switching, and excellent link backup.
Supports 4 units speaking at the same time, wired and wireless subsystems, and unified management.
Conference mode: First in, first out / Quantity limited.
There are three roles: Chairman, VIP, and Attendant, all defined by software.
Communication packet statistics function supports packet loss error analysis.
Specify the name of the unit. The conference system can name the conference unit and display it on the conference unit.
The system can manage a maximum of 999 units.
The wireless unit "Hybrid Battery" technology supports lithium batteries and AA5 batteries, which can be freely switched and used, and priorities can be set.
- Wired Subsystem -
Use uncompressed audio transmission to ensure CD sound quality.
The wired subsystem provides RJ45 & 6PIN DIN interfaces, supporting two access methods: network cable and shielded 6-core cable.
The transmission distance is up to 200 meters (@6PIN DIN link mode).
The wired subsystem has 4 input channels, each channel can connect up to 32 units, and supports a maximum of 128 units.
Support ring hand-in-hand function. Equipped with hot-swappable protection and short-circuit protection.
Comprehensive T.H.D of wired subsystem＜0.1%（@1KHz）
The wired subsystem communication frequency response is 50~16KHz, and the attenuation within the frequency response range is <1dB.
- Wireless Subsystem -
Based on 500-600Mhz AFH technology, real-time frequency scanning, automatic frequency hopping technology.The host scans 20 frequency points in real time.
Every time the unit speaks, the host assigns the optimal frequency to the unit, and the unit hops to the assigned frequency to work without any awareness.
The wireless subsystem delay is only 4ms, and there is no sense of echo when speaking.
The wireless gateway supports up to 256 wireless speaking units.
Wireless subsystem comprehensive T.H.D＜0.2% (@1KHz)
The communication frequency response is 30Hz~18KHz, and the attenuation within the frequency response range is <3dB.
Image